SNMP Traps are alert messages sent from an SNMP-enabled device to the IAI gateway. Traps provide information during an alarm event that is useful for diagnosing an issue. IAI does not rely on traps for sending alerts, but rather as an informational log.
To view the traps for a piece of equipment, navigate to My Equipment and select a Version 2 gateway (traps are not supported on version 1 models). Select the piece of equipment that you wish to view traps for.
Click the View Traps button located under Service Information. This will bring you to a list of the most recent traps reported by that piece of equipment.
If you do not see a list of traps when you get to this page, your equipment may not be configured to send traps to the IAI gateway. Configuration steps vary based on the type of equipment, but we have step-by-step guides for setting up traps on Vertiv equipment with Unity cards as well as ServersCheck sensors.